EN
- Overview
- Related Products
| Model | NPN open collector | BPN-QC30M | BPN-KC6M | BPN-CC30 |
| PNP open collector | BPN-QF30M | BPN-KF6M | BPN-CF30 | |
| Sensing type | Through-beam | Retro-Reflection | Diffuse reflection | |
| Sensing Range | 30M | 6M | 300mm | |
| Sensin target | Opaque materials of Min.Φ20mm |
Opaque materials of Min.Φ75mm | -------- | |
| Hysteresis | ----------------- | Max.20% at rated setting distance |
||
| Response time | Max.1ms | |||
| Power supply | 12 - 24 VDC ± 10 % (Ripple P-P:Max.10%) | |||
| Current consumption | Max.20mA | Max.30mA | Max.30mA | |
| Light source | Infrared LED(850nm) | |||
| Sensitivity adjustment | Sensitivity adjuster | |||
| Operation mode | Light ON/Dark ON operation mode switch | |||
| Control output | NPN or PNP open collector output Load voltage: max. 30VDC Load current: max.200mA Residual voltage - NPN:max.1VDC PNP: max.2.5VDC |
|||
| Protection circuit | Interference prevention function (except through-beam type), power reverse polarity protection circuit, output short over current protection circuit |
|||
| Connection | Cable type | |||
| Insulation resistance | Min.20MΩ (at 500VDC mega ) | |||
| Dielectric strength | 1500VAC 50/60Hz for 1minute | |||
| Vibration | 1.5mm amplitude at frequency of 10 to 55Hz (for 1 min) in each X, Y,Z direction for 2 hours | |||
| Shock | 500 m/s2(50G)in X,Y,Z directions for 3 times | |||
| Environ- ment |
Ambient illu. | Sunlight :Max.11,000lx , Incandescent lamp:Max.3,000lx (receiver illumination) | ||
| Ambient temp. | -20~+65℃ C27(at non-freezing status),Storage:-25~+70℃ | |||
| Ambient humi. | 35~85%RH, Storage:35~85%RH | |||
| Material | Case: polycarbonates, LED indicator: polycarbonates, sensing part: polymethyl methacrylate acrylic |
|||
| Protection | IP67(IEC standard) | |||
| Cable | Φ4mm, 4-wire, 2m (emitter of through-beam type: Φ4mm, 2-wire, 2m) | |||
