ALL PRODUCTS

BPQ series Front/Side Installation Type

Front/Side Installation Type,Easy front (M18 nut) and side (M3 bolt/nut)installation

Overview
Related Products

Model	NPN open collector	BPQ-QC20M	BPQ-KC4M	BPQ-CC1M	BPQ-CC30
	PNP open collector	BPQ-QF20M	BPQ-KF4M	BPQ-CF1M	BPQ-CF30
Sensing type		Through-beam	Retro-Reflection	Diffuse Reflection
Sensing Range		20M	4M	1M	300mm
Sensin target		Opaque materials of Min.Φ20mm	Opaque materials of Min.Φ75mm		--------
Hysteresis		-----------------			Max.20% at rated setting distance
Response time		Max.1ms
Power supply		12 - 24 VDC ± 10 % (Ripple P-P:Max.10%)
Current consumption		Max.20mA	Max.30mA	Max.35mA	Max.30mA
Light source		Red LED(660nm)	Red LED(660nm)	Infrared LED(850nm)	Red LED(660nm)
Sensitivity adjustment		Sensitivity adjuster
Operation mode		Light ON/Dark ON operation mode switch
Control output		NPN or PNP open collector output Load voltage: max. 30VDC Load current: max.200mA Residual voltage - NPN:max.1VDC PNP: max.2.5VDC
Protection circuit		Interference prevention function (except through-beam type), power reverse polarity protection circuit, output short over current protection circuit
Indicator		Operation indicator: red LED Stability indicator: green LED (emitter of through-beam type's power indicator: green)
Connection		Cable type
Insulation resistance		Min.20MΩ (at 500VDC mega )
Dielectric strength		1500VAC 50/60Hz for 1minute
Vibration		1.5mm amplitude at frequency of 10 to 55Hz (for 1 min) in each X, Y,Z direction for 2 hours
Shock		500 m/s2(50G)in X,Y,Z directions for 3 times
Environ- ment	Ambient illu.	Sunlight :Max.11,000lx , Incandescent lamp:Max.3,000lx (receiver illumination)
	Ambient temp.	-20~+65℃ C27(at non-freezing status),Storage:-25~+70℃
	Ambient humi.	35~85%RH, Storage:35~85%RH
Material		Case: polycarbonates, LED indicator: polycarbonates, sensing part: polymethyl methacrylate acrylic
Cable		Φ4mm, 4-wire, 2.1m (emitter of through-beam type: Φ4mm, 2-wire, 2.1m)
Protection		IP67(IEC standard)