| Model |
NPN Output |
BPS-RC15M |
BPS-RC10M |
BPS-LC5M |
BPS-LC3M |
BPS-DC10 |
| PNP Output |
BPS-RF15M |
BPS-RF10M |
BPS-LF5M |
BPS-LF3M |
BPS-DF10 |
| Sensing method |
Through-beam |
Retro-Reflection |
Diffuse Reflection |
| Sensing Range |
15M |
10M |
5M |
3M |
100mm |
| Sensing target |
Opaque materials, translucent materials |
| Hysteresis |
≤20% of Sensing Range |
| Response time |
Max. 1ms |
| Sensitivity adjustment |
YES (Adjuster) |
| Operation mode |
Light ON mode - Dark ON mode selectable (Control wire) |
| Indicator |
Visible red light |
| Power supply |
12-24 VDC ±10%(ripple P-P: 10%) |
| Current consumption |
≤45mA |
| Control output |
NPN open collector output / PNP open collector output model |
| Load voltage |
≤30V DC |
| Load current |
≤200mA |
| Residual voltage |
NPN:1VDC , PNP:2.5 VDC |
| Protection circuit |
Reverse power protection circuit, output short overcurrent protection circuit |
| Insulation resistance |
≤20 MΩ(500 VDC megger) |
| Noise immunity |
± 240 VDC the square wave noise (pulse width: 1 μs) by the noise simulator |
| Dielectric strength |
1,000 VAC~ 50/60 Hz for 1 min |
| Vibration |
1.5 mm double amplitude at frequency of 10 to 55 Hz (for 1 min) in each X, Y Zdirection for 2 hours |
| Ambient illuminance (receiver) |
Sunlight:≤11,000 lx, incandescent lamp: ≤3,000 lx |
| Ambient temperature |
-10 to 60 ℃, storage: -25 to 75 ℃ (no freezing or condensation) |
| Ambient humidity |
35 to 85 %RH, storage: 35 to 85 %RH (no freezing or condensation) |
| Protection rating |
IP67 |
| Connection |
Cable type |
| Cable spec. |
φ5 mm, 4-wire, 2 m |
| Material |
Case: ABS |
| Sensing part: PC lens |
EN
