EN
- Overview
- Related Products
| Model | NPN open collector | BPU1-QC3 | BPU1-QC5 |
| PNP open collector | BPU1-QF3 | BPU1-QF5 | |
| Sensing type | Through-beam | ||
| Sensing distance | 30mm | 50mm | |
| Min. sensing target | ≥Φ4mm | ≥Φ1.5mm | |
| Operation mode | Selectable Light ON or Dark ON by control wire | ||
| Response time | Max.1ms | ||
| Light source | Infrared | ||
| Peakemission wavelength | 940 nm | ||
| Sensitivity adjustment | YES (Adjuster) | ||
| Indicator | Operation indicator (red), powerindicator (green) | ||
| Power supply | 12 - 24 VDC ± 10 % (Ripple P-P:Max.10%) | ||
| Current consumption | ≤30 mA | ||
| Load current | ≤200 mA | ||
| Residual voltage | NPN:≤ 1VDC, PNP:≤ 2.5 VDC | ||
| Protection circuit | Reverse power protection circuit, output short overcurrent protection circuit | ||
| Insulation resistance | Min.20MΩ (at 500VDC mega ) | ||
| Noise immunity | ±240V the square wave noise (pulse width:1㎲)by the noise simulator | ||
| Dielectric strength | 1,000 VAC~ 50/60 Hz for1 min | ||
| Vibration | 1.5mm amplitude at frequency of 10 ~ 55Hz in each of X, Y,2 directions for 2 hours | ||
| Shock | 500 m/s2(50G)in X,Y,Z directions for 3 times | ||
| Ambient illuminance (receiver) | Sunlight :Max.11,000lx , Incandescent lamp:Max.3,000lx | ||
| Ambient temperature | -20~+60℃ C27,Storage:-25~+70℃ | ||
| Protection rating | IP50 | ||
| Connection | Cable type, cable connectortype | ||
| Cable spec. | Cable type: Φ4 mm, 4-wire, 2 m Cable connectortype: Φ4 mm, 4-wire, 0.5 m | ||
| Connector | 5-pin socket type | ||
| Material | Case: ABS, CAP: PC | ||
