ALL PRODUCTS

BPZ1 series

General-purpose Photoelectric Sensor for High Quality and Reliable Detection

Overview
Related Products

Model	NPN Output	BPZ1-QC5M	BPZ1-QC2M	BPZ1-KC2M	BPZ1-CC30	BPZ1-CC10
	PNP Output	BPZ1-QF5M	BPZ1-QF2M	BPZ1-KF2M	BPZ1-CF30	BPZ1-CF10
Sensing distance		5M	2M	2M	300mm	100mm
Sensing method		Through-beam		Retro-reflective	Diffuse-reflective
Standard sensing object		Opaque: 7- mm dia. min.	Opaque: 11- mm dia. min.	Opaque: 30- mm dia. min.	Transparent, opaque
Differential travel		--------------			20% max. of setting distance
Directional angle		Both emitter and receiver:3° to 10°		3° to 10°	--------------
Light source (wavelength)		Infrared LED (950 nm)
Power supply voltage		12 to 24 VDC ±10%, ripple (p-p): 10% max
Current consumption		50 mA max.(Emitter: 25 mA max., Receiver: 25 mA max.)		40 mA max
Control output (solid-state output)		Output current: 1.5 to 4 mA, Load current: 80 mA max. (residual voltage: 2 V max.)
Response time		Operate or reset: 3 ms max.		Operate or reset: 1 ms max.
Sensitivity adjustment		With an indicator
Ambient illumination (Receiver side)		Incandescent lamp: 3,000 lx max.Sunlight: 10,000 lx max.
Ambient temperature		Operating: −25 to 55°C, Storage: −40 to 70°C (with no icing or condensation)
Ambient humidity		Operating: 35% to 85%, Storage: 35% to 95% (with no condensation)
Insulation resistance		20 MΩ min. at 500 VDC
Dielectric strength		1,000 VAC, 50/60 Hz for 1 min
Vibration resistance (destruction)		10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance (destruction)		500 m/s2 3 times each in X, Y, and Z directions
Degree of protection		IEC IP65		IEC IP67	IEC IP65
Connection method		Pre-wired cable (standard length: 2 m)
Indicators		Light indicator (red), Stability indicator (green)
Material	Case	Polybutylene terephthalate
	Lens	Polycarbonate
	Mounting Bracket	Iron