EN
F36 series ultrasonic displacement sensor
Fast response: Ultrasonic sensors have a fast measurement speed, with response times typically in milliseconds, making them suitable for real-time monitoring of rapidly changing targets.
Strong anti-interference ability: Ultrasonic sensors have little impact on external factors such as ambient light and temperature, and have good anti-interference ability.
- Overview
- Related Products
| Product model | UCX50-F36-DI-H4 | UCX100-F36-DI-H4 | UCX200-F36-DI-H4 | ||
| UCX50-F36-DU-H4 | UCX100-F36-DU-H4 | UCX200-F36-DU-H4 | |||
| Detection range | 50..500mm | 70..1000mm | 70...2000mm | ||
| Non-detection zone | 0...50mm | 0...70mm | 0mm ..70mm | ||
| Transducer frequency | About 380KHz | About 205KHz | About 205KHz | ||
| response time | 50ms | About 125ms | About 125ms | ||
| Standard target version | 100mm*100mm | ||||
| type of output | DI :4-20mA | ||||
| DU：0-10V/0-5V | |||||
| Rated working current | 200mA Passage/overload protection | ||||
| accuracy of rated working | ≤ 0.5% | ||||
| working voltage | 10-30V DC ripple 10% | ||||
| Range adjustment | Adjust the farthest and nearest range through the adjusting line | ||||
| Degree of protection | IP65 | ||||
| Connection mode | Connector plug M12 x 1 , 5-pin/2m PVC cable | ||||
| LED yellow light | The yellow light of the switch status indicator flashes. The target is detected under the set status | ||||
| LED red light | The red light is always on: error Red light flashing: no target is detected in the set state | ||||
