ALL PRODUCTS

F36 series ultrasonic sensor

Distance measuring sensors are different from ordinary proximity switches and photoelectric sensors. Compared to inductive or capacitive proximity switches, distance sensors have a longer detection distance and can achieve detection over longer distances. Compared with photoelectric sensors, distance sensors can be applied in more harsh environments and are not affected by the color of the target object or factors such as dust and water mist in the air

Overview
Related Products

Product model	UCX50-F36-D4-H4	UCX100-F36-D4-H4	UCX200-F36-D4-H4
	UCX50-F36-D5-H4	UCX100-F36-D5-H4	UCX200-F36-D4-H4
Detection range	50..500mm	70..1000mm	80...2000mm
Non-detection zone	0...50mm	0...70mm	0mm ..80mm
Transducer frequency	About 380KHz	About 205KHz	180KHZ
response time	50ms	About 125ms	About 150ms
Standard target version	≤10Hz	≤ 3Hz	≤ 3.3Hz
type of output	D4 :NPN normally open/normally closed
	D5：PNP normally open/normally closed
Rated working current	200mA Passage/overload protection
accuracy of rated working	≤ 0.5%
working voltage	10-30V DC ripple 10%
Range adjustment	Adjust the farthest and nearest range through the adjusting line
Degree of protection	IP65
Connection mode	Connector plug M12 x 1 ,4-pin/2m PVC cable
LED yellow light	The yellow light of the switch status indicator flashes. The target is detected under the set status
LED red light	The red light is always on: error Red light flashing: no target is detected in the set state