EN
F42 series 6m ultrasonic sensor
Anti collision detection of high-altitude work platforms: Ultrasonic sensors are used on drivable high-altitude work platforms to prevent safety accidents caused by collisions and ensure the safe operation of equipment.
- Overview
- Related Products
| Product model | UCX600-F42-D4-H5 | UCX600-F42-D6-H5 | |||
| UCX600-F42-D5-H5 | UCX600-F42-D7-H5 | ||||
| Detection range | 400…6000mm | ||||
| Dead band | 0…400mm | ||||
| Transducer frequency | Approx.65KHz | ||||
| response time | Approx.650ms | ||||
| Switching frequency | ≤0.8Hz | ||||
| type of output | D4:NPN NO/NC D5:PNP NO/NC | ||||
| D7:2*NPN NO/NC D6:2*PNP NP/NC | |||||
| Rated operating current | 200mA | ||||
| Supply volitage | 10-30V DC ripple 10% | ||||
| Repetitive accuracy | ≤ 1% | ||||
| Range adjustment | Adjust the farthest and closest range by the adjusting the line | ||||
| Degree of protection | IP54 | ||||
| Connection type | Junction box with a core cross-sectional area of ≤2.5mm² | ||||
| Material | Induction head Teflon material(corrosion resistant) | ||||
| LED yellow light | The switch status indicator yellow light is flashing, and the target object is detected in the set state | ||||
| LED red light | The red light is always on: error Red light flashing: no target object detected in the set state | ||||
| Certificate | FCC CE CCC ROHS EAC | ||||
