EN
F42 Ultrasonic sensor SN:500mm
Ultrasonic sensors can achieve non-contact obstacle detection of automatic moving vehicles (AGVs) in the forward direction. When multiple sensors are used, they can be set to synchronous mode to prevent mutual interference. By setting up a warning point and a parking point, the vehicle can smoothly stop in front of obstacles instead of hitting the bumper and triggering the braking system
- Overview
- Related Products
| Product model | UCX50-F42-D4-H5 | UCX200-F42-D4-H5 | UCX400-F42-D4-H5 | ||
| UCX50-F42-D5-H5 | UCX200-F42-D5-H5 | UCX400-F42-D5-H5 | |||
| UCX50-F42S-D4-H5 | UCX200-F42S-D4-H5 | UCX400-F42S-D4-H5 | |||
| UCX50-F42S-D5-H5 | UCX200-F42S-D5-H5 | UCX400-F42S-D5-H5 | |||
| Detection range | 50..500mm | 80..2000mm | 200...4000mm | ||
| Non-detection zone | 0...50mm | 0...80mm | 0mm ..200mm | ||
| Transducer frequency | About 380KHz | About 180KHz | 85KHZ | ||
| response time | 50ms | About 150ms | About 85ms | ||
| Standard target version | ≤10Hz | ≤ 3.3Hz | ≤ 1.5Hz | ||
| type of output | D4 :NPN normally open/normally closed | ||||
| D5：PNP normally open/normally closed | |||||
| Rated working current | 200mA Passage/overload protection | ||||
| accuracy of rated working | ≤ 0.5% | ||||
| working voltage | 10-30V DC ripple 10% | ||||
| Range adjustment | Adjust the farthest and nearest range through the adjusting line | ||||
| Degree of protection | IP65 | ||||
| Connection mode | Connector plug M12 x 1 , 5-pin/2m PVC cable | ||||
| LED yellow light | The yellow light of the switch status indicator flashes. The target is detected under the set status | ||||
| LED red light | The red light is always on: error Red light flashing: no target is detected in the set state |
||||
