EN
L2 Ultrasonic distance sensor SN:200mm 2*NPN/2*PNP
Ultrasonic sensors are widely used in various fields, such as measuring distance, measuring liquid level, measuring flow rate, measuring pressure, detecting defects, etc. It can detect transparent or colored objects, metallic or non-metallic objects, solids, liquids, and powdery substances, and its detection performance is not affected by any environmental conditions, including smoke and dust environments and rainy days.
- Overview
- Related Products
| Product model | UCX50-L2-D6-H5 | UCX200-L2-D6-H5 | UCX400-L2-D6-H5 | ||
| UCX50-L2-D7-H5 | UCX200-L2-D7-H5 | UCX400-L2-D7-H5 | |||
| Detection range | 50..500mm | 80..2000mm | 200...4000mm | ||
| Non-detection zone | 0...50mm | 0...80mm | 0mm ..200mm | ||
| Transducer frequency | About 380KHz | About 180KHz | 85KHZ | ||
| response time | 21ms | About 65ms | About 145ms | ||
| Standard target version | ≤7Hz | ≤ 2.5Hz | ≤ 1Hz | ||
| type of output | D6：2 switch outputs PNP, NO/NC, programmable | ||||
| D7：2 switch outputs NPN, NO/NC, programmable | |||||
| Rated working current | 200mA Passage/overload protection | ||||
| accuracy of rated working | ≤ 0.5% | ||||
| working voltage | 10-30V DC ripple 10% | ||||
| Range adjustment | Adjust the farthest and nearest range through the adjusting line | ||||
| Degree of protection | IP65 | ||||
| Connection mode | Connector plug M12 x 1 , 5-pin/2m PVC cable | ||||
| LED yellow light | The yellow light of the switch status indicator flashes. The target is detected under the set status | ||||
| LED red light | The red light is always on: error Red light flashing: no target is detected in the set state | ||||
