EN
L2 Ultrasonic distance sensor SN:500mm NPN/PNP
Ultrasonic sensors are widely used in industrial, medical, environmental protection, measurement, metrology and other fields. For example, it can be used for detecting and measuring liquid levels, water levels, liquid items, powder materials, flammable gases, etc. It can also be used in fields such as automotive collision avoidance systems, smart homes, robots, etc
- Overview
- Related Products
| Product model | UCX50-L2-D4-H5 | UCX200-L2-D4-H5 | UCX400-L2-D4-H5 | ||
| UCX50-L2-D5-H5 | UCX200-L2-D5-H5 | UCX400-L2-D5-H5 | |||
| Detection range | 50..500mm | 80..2000mm | 200...4000mm | ||
| Non-detection zone | 0...50mm | 0...80mm | 0mm ..200mm | ||
| Transducer frequency | About 380KHz | About 180KHz | 85KHZ | ||
| response time | 50ms | About 150ms | About325ms | ||
| Standard target version | ≤10Hz | ≤ 3.3Hz | ≤ 1.5Hz | ||
| type of output | D4 :NPN normally open/normally closed | ||||
| D5：PNP normally open/normally closed | |||||
| Rated working current | 200mA Passage/overload protection | ||||
| accuracy of rated working | ≤ 0.5% | ||||
| working voltage | 10-30V DC ripple 10% | ||||
| Range adjustment | Adjust the farthest and nearest range through the adjusting line | ||||
| Degree of protection | IP65 | ||||
| Connection mode | Connector plug M12 x 1 , 5-pin/2m PVC cable | ||||
| LED yellow light | The yellow light of the switch status indicator flashes. The target is detected under the set status | ||||
| LED red light | The red light is always on: error Red light flashing: no target is detected in the set state |
||||
