EN
level ultrasonic sensor
The principle of ultrasonic sensors is to use the propagation characteristics of ultrasonic waves in air for distance measurement. Ultrasonic waves are waves with frequencies higher than what humans can hear, and their propagation speed in air is 343 meters per second. Sensors emit ultrasonic pulses, which are reflected back when they encounter a target object. The sensor receives the reflected ultrasonic waves and measures their time, then calculates the distance from the target object to the sensor based on the propagation time and velocity of the sound waves. By continuously sending and receiving ultrasonic waves, sensors can monitor the position and distance changes of target objects in real time
- Overview
- Related Products
| Product model | UCX50-U9-D4-H5 | UCX200-U9-D4-H5 | UCX400-U9-D4-H5 | ||
| UCX50-U9-D5-H5 | UCX200-U9-D5-H5 | UCX400-U9-D5-H5 | |||
| Detection range |
50..500mm | 80..2000mm | 200...4000mm | ||
| Non-detection zone |
0...50mm | 0...80mm | 0mm ..200mm | ||
| Transducer frequency |
About 380KHz | About 180KHz | 85KHZ | ||
| response time | 50ms | 150ms | About 325ms | ||
| Standard target version |
≤10Hz | ≤ 3.3Hz | ≤ 1.5Hz | ||
| type of output | D4 :NPN normally open/normally closed | ||||
| D5 :PNP normally open/normally closed | |||||
| Rated working current |
200mA Passage/overload protection | ||||
| Repetition accuracy of |
≤ 0.5% | ||||
| working voltage |
10-30V DC ripple 10% | ||||
| Range adjustment |
Adjust the farthest and nearest range through the adjusting line | ||||
| Degree of protection |
IP65 | ||||
| Connection mode | Connecting junction box, with a cross-sectional area of wire core less than or equal to 2.5mm ² | ||||
| LED yellow light |
The yellow light of the switch status indicator flashes. The target is detected under the set status |
||||
| LED red light | The red light is always on: error Red light flashing: no target is detected in the set state |
||||
