EN
M12 Non-flush Inductive proximity sensor
Inductive sensor, detecting metal objects, detection distance of 4mm
- Overview
- Related Products
| rofile data | M12*1mm | ||
| Installation method | Non-Flushed | ||
| Detection distance | 4mm | ||
| Reliable detection distance | 0-3.6mm | ||
| DC 3- wire / DC 4-wire | NPN | NO | BIMN4-GM12-N1 |
| NC | BIMN4-GM12-N2 | ||
| NO+NC | BIMN4-GM12-N3 | ||
| PNP | NO | BIMN4-GM12-P1 | |
| NC | BIMN4-GM12-P2 | ||
| NO+NC | BIMN4-GM12-P3 | ||
| DC 2 wire | NO | BIMN4-GM12-D1 | |
| NC | BIMN4-GM12-D2 | ||
| AC 2-wire | NO | BIMN4-GM12-A1 | |
| NC | BIMN4-GM12-A2 | ||
| Supply voltage | DC 3-wire：DC10-30V | ||
| DC 2-wire：DC10-30V | |||
| AC 2-wire：AC20-250V | |||
| Voltage drop | DC 3-wire：<1.5V | ||
| DC 2-wire：<6V | |||
| AC 2-wire: <8V | |||
| load current | DC 3-wire：<200mA | ||
| DC 2-wire：<200mA | |||
| AC 2-wire：>300mA | |||
| Current consumption | DC 3-wire：<10mA | ||
| DC 2-wire：<0.8mA | |||
| AC 2-wire：<2.5V | |||
| Leakage current | DC 3-wire：<0.01mA | ||
| DC 2-wire：<0.8mA | |||
| AC 2-wire：<2.5V | |||
| Insulation voltage | DC 3-wire：1000V/AC 60S | ||
| DC 2-wire：1000V/AC 60S | |||
| AC 2-wire：2000V/AC 60S | |||
| switching frequency | DC 3-wire：1000Hz | ||
| DC 2-wire：800Hz | |||
| AC 2-wire：25Hz | |||
| Short circuit protection/reverse connection protection | DC 3-wire：have/have | ||
| DC 2-wire：have/have | |||
| AC 2-wire： | |||
| indicator light | Red LED | ||
| Degree of protection | Ip67 | ||
| Shell material | Nickel Plated Brass | ||
| Test surface material | PBT | ||
| Connection mode | 2m PVC cable | ||
