EN
Non contact liquid level sensor Ultrasonic distance sensor
Not picky about the material of the detection object to maintain ultra-high stability
Even workpieces that are difficult to detect with reflective photoelectric sensors, such as metal, glass, and liquid surfaces, can be easily detected using the FW series. And it will not be affected by the surface color, pattern, or gloss.
- Overview
- Related Products
| Product model | UBX50-T30-D4-H5 | UBX200-T30-D4-H5 | UBX50-T30-D6-H5 | UBX200-T30-D6-H5 | |
| UBX50-T30-D5-H5 | UBX200-T30-D5-H5 | UBX50-T30-D7-H5 | UBX200-T30-D7-H5 | ||
| Detection range | 50...500mm | 70...2000mm | 50...500mm | 70...2000mm | |
| Non-detection zone | 0mm ..50mm | 0mm ..70mm | 0mm ..50mm | 0mm ..70mm | |
| Transducer frequency | About 380KHz | About 180KHZ | About 380KHz | About 180KHZ | |
| response time | About 50ms | About 150ms | About 21ms | About 65ms | |
| Standard target version | ≤ 10Hz | ≤ 3.3Hz | ≤ 7Hz | ≤ 2.5Hz | |
| type of output | D4：NPN normally open/normally closed D6：2 switch outputs PNP, NO/NC, progr | ||||
| D5:PNP normally open/normally closed D7：2 switch outputs NPN, NO/NC, prog | |||||
| working voltage | 10-30V DC ripple 10% | ||||
| Rated working current | 200mA Passage/overload protection | 00 mA , short-circuit/overload prot | |||
| accuracy of rated working | ≤ 0.5% | ≤ 0.1% | |||
| Range adjustment | Adjust the farthest and nearest range through the adjusting line | ||||
| Degree of protection | IP65 | ||||
| Connection mode | Connector plug M12 x 1 , 5-pin/2m PVC cable | ||||
| LED yellow light | The yellow light of the switch status indicator flashes. The target is detected under the set status | ||||
| LED red light | The red light is always on: error Red light flashing: no target is detected in the set state | ||||
