EN
RS485 output 1m 2m 4m 6m ultrasonic level sensor
Ultrasonic sensors can detect the status of containers. When installing an ultrasonic sensor on the top of a plastic melt tank or plastic pellet chamber and emitting sound waves into the interior of the container, the ultrasonic sensor will detect based on this sound wave
- Overview
- Related Products
| Product model | UBX100-GM1875-RS4-H4 | UBX200-GM30-RS4-H4 | UBX400-GM30-RS4-H4 | UBX600-GM30-RS4-H4 | |
| Detection range |
60~1000mm | 150~2000mm | 250~4000mm | 500~6000mm | |
| Non-detection zone |
0~60mm | 0~150mm | 0~250mm | 0~500mm | |
| response time | 125ms | 125ms | 225ms | 195ms | |
| angle | 10° | 15° | 15° | 25° | |
| type of output | RS485 | ||||
| working voltage |
10-30V DC ripple 10% | ||||
| Rated working current |
20ma | 20ma | 20ma | ||
| Repetition accuracy of |
0.10% | 0.10% | 0.10% | 0.10% | |
| Linearity | <1% | <1% | <1% | <1% | |
| material quality | Copper nickel plating (customizable stainless steel shell) | ||||
| Range adjustment |
Adjust the farthest and nearest range through the adjusting line | ||||
| Degree of protection |
IP67 | ||||
| Connection mode | Connector plug M12 x 1 , 5-pin/2m PVC cable | ||||
| LED yellow light | The yellow light of the switch status indicator flashes. The target is detected under the set status | ||||
| LED red light | The red light is always on: error Red light flashing: no target is detected in the set state |
||||
