EN
Slot-type Photomicro sensor(Connector models)
Global Standard Slot-type
photomicrosensors with 50- to
100-mA direct switching capacity.
- Overview
- Related Products
| Type | Standard | L-shaped | T-shaped, slot center 7 mm | Close-mounting | T-shaped, slot center 10 mm | F-shaped | R-shaped | ||
| NPN models | EE-SX670- WR | EE-SX671- WR | EE-SX672- WR | EE-SX673- WR | EE-SX674- WR | EE-SX675- WR | EE-SX676- WR | EE-SX677- WR | |
| PNP models | EE-SX670P- WR | EE-SX671P- WR | EE-SX672P- WR | EE-SX673P- WR | EE-SX674P- WR | EE-SX675P- WR | EE-SX676P- WR | EE-SX677P- WR | |
| Sensing distance | 5 mm (slot width) | ||||||||
| Sensing object | Opaque: 2 × 0.8 mm min. | ||||||||
| Differential distance | 0.025 mm | ||||||||
| Light source | Infrared LED with a peak wavelength of 940 nm | ||||||||
| Indicator | Light indicator (red) (turns ON when light is interrupted for models with A or R suffix) | ||||||||
| Supply voltage | 5 to 24 VDC ±10%, ripple (p-p): 10% max. | ||||||||
| Current consumption | 12 mA max. | ||||||||
| Control output | NPN open collector: 5 to 24 VDC, 100 mA max. 100 mA load current with a residual voltage of 0.8 V max. 40 mA load current with a residual voltage of 0.4 V max. OFF current (leakage current): 0.5 mA max. PNP open collector: 5 to 24 VDC, 50 mA max. 50 mA load current with a residual voltage of 1.3 V max. OFF current (leakage current): 0.5 mA max. | ||||||||
| Protection circuits | Load short circuit protection | ||||||||
| Response frequency | 1 kHz min. (3 kHz average) | ||||||||
| Ambient illumination | 1,000 lx max. with fluorescent light on the surface of the receiver. | ||||||||
| Ambient temperature range | Operating: −25 to +55°C, Storage: −30 to +80°C (with no icing or condensation) | ||||||||
| Ambient humidity range | Operating: 5% to 85%, Storage: 5% to 95% (with no icing or condensation) | ||||||||
| Vibration resistance | Destruction: 20 to 2,000 Hz (peak acceleration: 100 m/s2) 1.5-mm double amplitude for 2 h (4-min periods) each in X, Y, and Z directions | ||||||||
| Shock resistance | Destruction: 500 m/s2 for 3 times each in X, Y, and Z directions | ||||||||
| Degree of protection | IP50 | ||||||||
| Connecting method | Pre-wired Models (Standard cable length: 1 m),Models with Connectors (Standard cable length: 0.1 m) | ||||||||
| Material | Case | Polybutylene phthalate (PBT) | |||||||
| Cover | Polycarbonate | ||||||||
| Emitter/receiver | |||||||||
