Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000

SN:4000mm Car washing machine ultrasonic sensor

Motion control: Ultrasonic sensors can be used for robot grasping, detecting the distance of material movement, as well as object positioning and tracking
  • Overview
  • Related Products
Product model UBX400-GM30-D4-H5 UBX400-GM30-D6-H5 UBX400-GM30-DI-H5
UBX400-GM30-D5-H5 UBX400-GM30-D7-H5 UBX400-GM30-DU-H5
Detection range 200...4000mm 200...4000mm 200...4000mm
Non-detection zone 0mm ..200mm 0mm ..200mm 0mm ..200mm
Transducer frequency About 85KHz About 85KHz About 85KHz
response time About325ms About325ms About 145ms
Standard target version ≤ 1.5Hz ≤ 1Hz Standard target version100mm*100mm
type of output D4 :NPN normally open/normally closed   D6:2 switch outputs PNP, NO/NC, programmable
D5:PNP normally open/normally closed    D7:2 switch outputs NPN, NO/NC, programmable
    DI:4-20mA   DU:0-10V
Rated working current 200mA Passage/overload protection 2 x 100 mA , short-circuit/overload protected
accuracy of rated working ≤ 0.5% ≤ 0.5%
working voltage 10-30V DC ripple 10%
Range adjustment Adjust the farthest and nearest range through the adjusting line
Degree of protection IP65
Connection mode Connector plug M12 x 1 , 5-pin/2m PVC cable
LED yellow light The yellow light of the switch status indicator flashes. The target is detected under the set status
LED red light The red light is always on: error
Red light flashing: no target is detected in the set state

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000