| Installation method |
Flushed |
| Detection distance |
10mm |
| Reliable detection distance |
0...8mm |
| DC 3- wire |
NPN |
NO |
TL-N10ME1 |
| NC |
TL-N10ME2 |
| PNP |
NO |
TL-N10MF1 |
| NC |
TL-N10MF2 |
| DC 2-wire |
NO |
TL-N10MD1 |
| NC |
TL-N10MD2 |
| AC 2-wire |
NO |
TL-N10MY1 |
| NC |
TL-N10MY2 |
| Differential travel |
15% max. of sensing distance |
| Detectable object |
Ferrous metal |
| Standard sensing object |
Iron, 40 × 40 × 1 mm |
| Response frequency |
E/F Models: 500 Hz |
| Y Models: 10 Hz |
| Power supply voltage (operating voltage range) |
E/F Models: 12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max. |
| Y Models: 100 to 220 VAC (90 to 250 VAC), 50/60 Hz |
| Current consumption |
E/F Models: 8 mA max. at 12 VDC, 15 mA max. at 24 VDC |
| Leakage current |
Y Models: Refer to Engineering Data on page 5 |
| Control |
Load current |
E/F Models: 100 mA max. at 12 VDC, 200 mA max. at 24 VDC |
| output |
Y Models: 10 to 200 mA |
| Residual voltage |
E/F Models: 1 V max. (load current: 200 mA) |
| Y Models: Refer to Engineering Data on page 5. |
| Indicators |
E/F Models: Detection indicator (red) |
| Operation mode |
E1/F1/Y1 Models: NO |
| E2/Y2 Models: NC |
| Refer to the timing charts under I/O Circuit Diagrams on page 7 for details. |
| Protection circuits |
E Models: Reverse polarity protection, Surge suppressor |
| Y Models: Surge suppressor |
| Ambient temperature range |
Operating/Storage: −25 to 70°C (with no icing or condensation) |
| Ambient humidity range |
Operating/Storage: 35% to 95% (with no condensation) |
| Temperature influence |
±10% max. of sensing distance at 23°C in the temperature range of −25 to 70°C |
| Voltage influence |
E/F Models: ±2.5% max. of sensing distance at rated voltage in rated voltage ±10% range |
| Y Models: ±1% max. of sensing distance at rated voltage in rated voltage ±10% range |
| Insulation resistance |
50 MΩ min. (at 500 VDC) between current-carrying parts and case |
| Dielectric strength |
E/F Models: 1,000 VAC, 50/60 Hz for 1 min between current-carrying parts and case |
| Y Models: 2,000 VAC, 50/60 Hz for 1 min between current-carrying parts and case |
| Vibration resistance |
Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions |
| Shock resistance |
Destruction: 500 m/s2 10 times each in X, Y, and Z directions |
| Connection method |
Pre-wired Models (Standard cable length: 2 m) |
| Weight (packed state) |
Approx. 240 g |
EN
