EN
- Overview
- Related Products
| Installation method | Flushed | ||
| Detection distance | 20mm | ||
| Reliable detection distance | 0...8mm | ||
| DC 3- wire | NPN | NO | TL-N20ME1 |
| NC | TL-N20ME2 | ||
| PNP | NO | TL-N20MF1 | |
| NC | TL-N20MF2 | ||
| DC 2-wire | NO | TL-N20MD1 | |
| NC | TL-N20MD2 | ||
| AC 2-wire | NO | TL-N20MY1 | |
| NC | TL-N20MY2 | ||
| Differential travel | 15% max. of sensing distance | ||
| Detectable object | Ferrous metal | ||
| Standard sensing object | Iron, 50 × 50 × 1 mm | ||
| Response frequency | E Models: 40 Hz Y Models: 10 Hz |
||
| Power supply voltage (operating voltage range) | E/F Models: 12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max. Y Models: 100 to 220 VAC (90 to 250 VAC), 50/60 Hz |
||
| Current consumption | E/F Models: 8 mA max. at 12 VDC, 15 mA max. at 24 VDC | ||
| Leakage current | Y Models: Refer to Engineering Data on page 5 | ||
| Control output |
Load current | E/F Models: 100 mA max. at 12 VDC, 200 mA max. at 24 VDC Y Models: 10 to 200 mA |
|
| Residual voltage | E/F Models: 1 V max. (load current: 200 mA) Y Models: Refer to Engineering Data on page 5. |
||
| Indicators | E/F Models: Detection indicator (red) | ||
| Operation mode | E1/F1/Y1 Models: NO E2/Y2 Models: NC |
||
| Refer to the timing charts under I/O Circuit Diagrams on page 7 for details. | |||
| Protection circuits | E Models: Reverse polarity protection, Surge suppressor Y Models: Surge suppressor |
||
| Ambient temperature range | Operating/Storage: −25 to 70°C (with no icing or condensation) | ||
| Ambient humidity range | Operating/Storage: 35% to 95% (with no condensation) | ||
| Temperature influence | ±10% max. of sensing distance at 23°C in the temperature range of −25 to 70°C | ||
| Voltage influence | E/F Models: ±2.5% max. of sensing distance at rated voltage in rated voltage ±10% range Y Models: ±1% max. of sensing distance at rated voltage in rated voltage ±10% range |
||
| Insulation resistance | 50 MΩ min. (at 500 VDC) between current-carrying parts and case | ||
| Dielectric strength | E/F Models: 1,000 VAC, 50/60 Hz for 1 min between current-carrying parts and case Y Models: 2,000 VAC, 50/60 Hz for 1 min between current-carrying parts and case |
||
| Vibration resistance | Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions | ||
| Shock resistance | Destruction: 500 m/s2 10 times each in X, Y, and Z directions | ||
| Connection method | Pre-wired Models (Standard cable length: 2 m) | ||
| Weight (packed state) | Approx. 340 g | ||
