EN
- Overview
- Related Products
| Installation method | Flushed | ||
| Detection distance | 2mm | ||
| Reliable detection distance | 0...1.5 mm | ||
| DC 3- wire | NPN | NO | TL-Q2MC1 |
| NC | TL-Q2MC2 | ||
| PNP | NO | TL-Q2MB1 | |
| NC | TL-Q2MB2 | ||
| Differential travel | 10% max. of sensing distance | ||
| Detectable object | Ferrous metal | ||
| Standard sensing object | Iron, 8 × 8 × 1 mm | ||
| Response frequency | 500 Hz | ||
| Power supply voltage (operating voltage range) | 12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max. | ||
| Current consumption | 15 mA max. at 24 VDC (no-load) | ||
| Control output | Load current | NPN open collector 100 mA max. at 30 VDC max. | |
| Residual voltage | 1 V max. (under load current of 100 mA with cable length of 2 m) | ||
| Indicators | Detection indicator (red) | ||
| Operation mode | NO | ||
| Refer to the timing charts under DC 3-Wire Models on page 7 for details. | |||
| Protection circuits | Reverse polarity protection, Surge suppressor | ||
| Ambient temperature range | Operating/Storage: −10 to 60°C (with no icing or condensation) | ||
| Ambient humidity range | Operating/Storage: 35% to 95% (with no condensation) | ||
| Temperature influence | ±10% max. of sensing distance at 23°C in the temperature range of −10 to 60°C | ||
| Voltage influence | ±2.5% max. of sensing distance at rated voltage in rated voltage ±10% range | ||
| Insulation resistance | 50 MΩ min. (at 500 VDC) between current-carrying parts and case | ||
| Dielectric strength | 1,000 VAC for 1 min between current-carrying parts and case | ||
| Vibration resistance | Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions | ||
| Shock resistance | Destruction: 1,000 m/s2 10 times each in X, Y, and Z directions | ||
| Connection method | Pre-wired Models (Standard cable length: 2 m) | ||
| Weight (packed state) | Approx. 60 g | ||
