- Overview
- Related Products
Installation method | Flushed | ||
Detection distance | 5mm | ||
Reliable detection distance | 0...4mm | ||
DC 3- wire | NPN | NO | TL-Q5MC1 |
NC | TL-Q5MC2 | ||
PNP | NO | TL-Q5MB1 | |
NC | TL-Q5MB2 | ||
DC 2-wire | NO | TL-Q5MD1 | |
NC | TL-Q5MD2 | ||
Differential travel | 10% max. of sensing distance | ||
Detectable object | Ferrous metal | ||
Standard sensing object | Iron, 15 × 15 × 1 mm | ||
Response time | 2 ms max. | ||
Response frequency | 500 Hz | ||
Power supply voltage (operating voltage range) | 12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max. | ||
Current consumption | 10 mA max. at 24 VDC | ||
Control output |
Load current | TL-Q5MC@: NPN open collector, 50 mA max. at 30 VDC max. TL-Q5MB@: PNP open collector, 50 mA max. at 30 VDC max. |
|
Residual voltage | 1 V max. (under load current of 50 mA with cable length of 2 m) | ||
Indicators | Detection indicator (red) | ||
Operation mode | B1/C1 Models: NO C2 Models: NC |
||
Refer to the timing charts under DC 3-Wire Models on page 7 for details. | |||
Protection circuits | Reverse polarity protection, Surge suppressor | ||
Ambient temperature range | Operating/Storage: −25 to 70°C (with no icing or condensation) | ||
Ambient humidity range | Operating/Storage: 35% to 95% (with no condensation) | ||
Temperature influence | ±20% max. of sensing distance at 23°C in the temperature range of −25 to 70°C |
||
Voltage influence | ±2.5% max. of sensing distance at rated voltage in rated voltage ±10% range | ||
Insulation resistance | 5 MΩ min. (at 500 VDC) between current-carrying parts and case |
||
Dielectric strength | 500 VAC, 50/60 Hz for 1 min between current-carrying parts and case |
||
Vibration resistance | Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions | ||
Shock resistance | Destruction: 200 m/s2 10 times each in X, Y, and Z directions | ||
Connection method | Pre-wired Models (Standard cable length: 2 m) | ||
Weight (packed state) | Approx. 90 g |