EN
Ultrasonic distance sensor
Sewers have special environments and media, and the measured medium may not necessarily be entirely liquid, which can have an impact on the rise of liquid level and liquid pressure. Ultrasonic sewer level gauges use non-contact measurement, which is not affected by sediment accumulation, will not block, and also ensures the safety of the instrument
- Overview
- Related Products
| Product model | UBX50-T18-DI-H5 | UBX100-T18-DI-H5 | |||
| UBX50-T18-DU-H5 | UBX100-T18-DU-H5 | ||||
| Detection range | 50...500mm | 70...1000mm | |||
| Non-detection zone | 0mm ..50mm | 0mm ..70mm | |||
| Transducer frequency | About 380KHz | About 205KHZ | |||
| response time | About 50ms | About125ms | |||
| Standard target version | 100mm*100mm | ||||
| type of output | DI : 4-20mA | ||||
| DU：0-10V | |||||
| working voltage | DI:10-30V DC ripple 10% DU:15-30V DC ripple 10% | ||||
| Rated working current | ≤ 45mA | ≤ 50mA | |||
| accuracy of rated working | ±1.5% | ||||
| Range adjustment | Adjust the farthest and nearest range through the adjusting line | ||||
| Degree of protection | IP65 | ||||
| Connection mode | Connector plug M12 x 1 , 5-pin/2m PVC cable | ||||
| LED yellow light | The yellow light of the switch status indicator flashes. The target is detected under the set status | ||||
| LED red light | The red light is always on: error Red light flashing: no target is detected in the set state | ||||
